REMS CURVO 22 V
CORDLESS TUBE BENDER
Universal, compact electric tool for cold bending of pipes and tubes up to 180°. Can be used anywhere, without vice. For trade and industry. For the building site and the workshop. Li-Ion Technology. For battery and corded operation.
Hard, half-hard, soft copper tubes, also thin-wall Ø 10–28 mm, Ø 3/8–1-1/8″
Coated soft copper tubes, also thin-wall Ø 10–18 mm
Thick-walled copper pipes K65 for refrigeration and air conditioning technology EN 12735-1 Ø 3/8–11/8″ *
Pipes of press fitting systems made of stainless steel, carbon steel, also coated Ø 12–28 mm, soft precision steel tubes Ø 10–28 mm.
Steel pipes EN 10255 Ø 1/4–3/4″
Electric conduit DIN EN 50086 Ø 16–25 mm
Multi-layer composite tubes Ø 14–40 mm
PLEASE NOTE: THE CURVO CORDLESS 22V BENDER WILL BEND FROM 3/8″ to 1-1/8″ HALF HARD, HARD OR K65 COPPER PIPE (USING 581260 FORMER ONLY)
PLEASE CHOOSE THE 110V MAINS CURVO AS THAT MODEL WILL BEND UP TO 1-3/8″ SOFT, HALF HARD, HARD OR K65 COPPER PIPE (USING THE 581350 FORMER ONLY)
(All formers are purchased separatley, and there are certain formers that will only work with K65 copper please consult our sales dept or download Bending and Back Former Spec Sheet)
REMS Curvo 22 V – wrinkle-free bending of pipes.
Mobile, handy, light. Universal for many pipes and tubes. Ready to use immediately without setting. Fast and creep speed operation with immediate stop for precise bending. Quick change of bending and back formers. Li-Ion 21.6V, 5.0 Ah battery for approx. 90 pipe bends of the stainless steel Ø 22mm press fitting system with one battery charge.
BASIC SET INCLUDES:
Curvo Cordless Drive Unit (22V)
Insert Bolt
REMS 22V v 5.0 Ah Li-Ion battery
Rapid charger
Steel Carry Case
(Supplied without any bending and back formers, purchased seperatly)
